| |
| New 6-Digit Display Module for ASCII RS232 and RS485 Lines |
 |
The SerialDis ASCII display module operates from a 8 to 18V DC power supply, and will accept ASCII signals from RS232 and RS485 comms ports to provide a bright, alphanumeric display. |
| |
| New DIN-Rail Mounted Single-Action On/Off Temperature Controller |
|
The EV6421M is a cost-effective DIN-Rail mounting, On/Off temperature controller which will accept a wide variety of inputs, and has a digital input, dual programmable alarms, 10A output load capacity, and many other useful features. |
| |
| New Current Loop Accelerometer added to range |
|
Celsum Technologies has recently supplied several ±100g accelerometers with a 2-wire, 4-20mA output. With a dynamic range of 0 to >200Hz, the single axis CTA103A is rugged, environmentally sealed, and cost effective. |
| |
| Special Instrument Designed and Built for DSTL |
|
Celsum Technologies Ltd has successfully designed, built and delivered to budget and to a tight timescale a special instrument for the Defence Science and Technology Laboratory (DSTL), an agency of the UK Ministry of Defence. Construction of the robust instrument involved designing a bespoke framework of mild steel tubing with a ventilated electrical cabinet holding electromechanical switchgear and low-voltage logic circuitry, laser-cut and precision welded stainless steel, and was designed to allow easy transport using a fork-lift truck. |
| |
| Dynisco Polytest Materials Testing Instruments Now Available from Celsum |
|
|
Instruments available include the LCR7000 series of automated capillary extrusion rheometers, the API Advanced Pendulum Impact Test, the LMI 4000 Melt Flow Indexer, the LOI Limiting Oxygen Indexer, the CMR IV Continuous Melt Rheometer, the FCR Flow Characterization Rheometer, the HDT Vicat Heat Distortion Test, LEC Pelletizing Chopper, LME Laboratory Mixer Extruder, LMM Laboratory Mixing Moulder, REX Laboratory Extrusion System, TUS Take Up System, and the ViscoSensor on-line Viscotester. |
| |
| HGC Humidity Generator and Controller for Precise Sample Conditioning |
|
The HGC Humidity Generator and Controller is a unique instrument that actually measures the humidity with a sensor located near to the sample, and then controls the humidity to the desired value, up to 85% RH. The unit is computer controlled, and may be programmed to control the humidity to a fixed value, or can ramp the humidity between preset limits, or can execute a series of pre-defined humidity steps. The HGC is capable of conditioning a sample chamber up to nominally 2 litres, has a heated transfer line in order to minimise problems due to condensation, and is easily integrated into your experiment.
Applications include Atomic Force Microscopy (AFM), Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA, DMTA), Rheometry, Spectroscopy, Dielectric Analysis (DETA), and many more. |
| |
| New High Speed, High Frequency Radio Telemetry |
   |
The T24-SA is a high performance strain gauge to radio telemetry converter module, offering precision measurement with high performance two-way telemetry. Usable around the globe on licence-free 2.4 GHz frequency, the T24 range avoids local radio interference to ensure data integrity and security. For use in any measuring applications, from torque to weight, vibration to flow, the T24 offers users a complete solution to your measurement requirements. |
| |
| Workability Tester For Fresh Cement And Concrete Is Fully Controlled |
|
Celsum Technologies has introduced the new version of the CTPT Two-Point Workability Tester for fresh cement and concrete and similar materials. The CTPT allows the force needed to agitate the sample over a range of speeds to be measured. From these data and with calibration, a plot of force against speed may be constructed. The slope of the resulting graph gives a measure of the viscosity or plasticity of the specimen, and the intercept with the force axis the yield or slump characteristics. The instrument may be operated manually or under computer control, with speed control allowing constant speed, speed ramps, or a "staircase" speed program. The machine is fitted with interlocked guards, and is supplied complete with control computer and software. |
| |
|
| Extend Serial Link Communications using Radio Modems |
|
Celsum Technologies is offering state-of-the-art serial radio modems, which will allow communication over an RS232, RS422 or RS485 serial link at distances of 3 kilometres or more. The radio modems may be used licence free at broadcast power outputs of up to 0.5 Watt (in the UK), and may be used at greater distances by obtaining a licence. In permitting communications on serial links (at data transfer rates up to 19,200 baud), the radio modems complement Celsum Technologies' range of strain gauge conditioning and process control instrumentation. |
| |
|
| CROCS Control System Renovates Obsolete Oven |
 |
Celsum Technologies has designed and installed a customized Oven Control System to an existing oven for drying hazardous materials, prolonging the working life of an otherwise obsolete piece of capital equipment. The CROCS system uses two TJ34 controllers, separately housed pneumatic controllers and intrinsically safe barriers to provide a safely interlocked, fail-safe system for easy, non-intrusive operation. |
| |
| Professional Range of USB to Serial and Ethernet Connectors |
  |
Celsum Technologies is now offering a range of serial connectivity products to permit users to easily connect serial devices to the USB ports of PCs and to 10/100 Ethernet networks. The UltraPort USB to Serial Port interface adaptors are available in 1, 2, 4 and 8 Serial Port models, and the IOLAN series in single and double port version, with ultra-secure versions available for connection over networks. |
| |
| Celsum
at East Midlands Manufacturing Show |
 |
Celsum
Technologies Ltd launched a range of Radio
Telemetry instruments, sub-miniature
load cells, temperature and process
controllers, precision extrusion
dies and strain
gauge conditioning instruments. |
| |
| Digital
& Analogue Capability for Radio Telemetry System |
The
TIO
is a high performance, very flexible telemetry instrument that
provides digital and analogue IO to a radio
telemetry system. The nature and combination of the IO signals
is determined by a range of plug-in modules, so the user can configure
the instrument to suit their application. The TIO
can be driven or read from a computer connected to a TCM
as well as allowing other Telemetry devices to modify the IO parameters;
the TIO
has the capability of requesting data from other devices and modifying
its outputs accordingly.
|
 |
|
| Differential
Pressure Sensor with Big Over-Range Capacity |
 |
The
NE74
Series was initially developed for oil and gas exploration
applications, but has also many other uses. It is available in full
scale ranges to 100 bars (1500 psi), with a 10-times overrange capacity.
Typical
applications include differential pressure measurement in down-hole
installations with a very high over-range capacity, and depth measurement
in high temperature and high vibration applications.
|
|
|
| |
|
| |
| Celsum
Supplies Heart Of New Supermaket Scales |
 |
Celsum
Technologies is providing the New Generation DSC
Digital Strain Card to connect a load cell to a computer
in novel, networked, coin-operated weighing scales, the VideoMedia®
from Avisis PLC, which are appearing in major supermarkets.
The on-board computer allows live promotional messages to be played
whilst the scale is not in use. The
DSC provides a very cost
effective way of providing accurate digital data from a strain gauge
device to a computer system via a serial (com) port without the
need for expensive analogue-to-digital cards. The DSC
is fully programmable, may be configured to output data in engineering
units compensated for temperature drift and non-linearity, and has
recently been enhanced with the launch of the New Generation
DSC and Dcell
Strain Puck.
DSC
Amplifier
|
| |
| TM103
Miniature Digital Thermomometer |
| Available
in packs of 5, this compact, panel-mounted, mains-powered digital
thermometer is supplied complete with a temperature probe, has a range
of -40 to +110°C, a resolution of 0.1°C, and is very competitively
priced.
|
 |
|
| Sub-Miniature
Load Cells and Pressure Transducers |
Celsum
Technologies can now supply a
range of miniature strain gauge based pressure transducers
and load cells for tension and compression.
|
|
| |
| Range
of Radio Telemetry Devices for Strain Gauge Instruments |
|
|
Celsum
offers a range of new radio
telemetry instruments for remotely monitoring strain gauge
devices such as load cells and pressure sensors. |
| |
| Die
Swell And Viscous Heating Combo |
| Celsum
Technologies has supplied a stand-alone system to operate with
a capillary extrusion rheometer to measure die swell and shear heating
on-line directly after extrusion. The unit is portable so that it
can be used with a capillary rheometer or on an extrusion line. The
system, CEST, is supplied
with its own instrumentation package, dedicated computer system and
bespoke software. |
 |
| |
| Complex
Bi-Hyperbolic Profile Instrumented Extrusion Dies |
|
|
Celsum
Technologies has supplied a leading Cambridge research institution
with a series of precision dies
with mirror-image bi-hyperbolic profiles for key studies into complex
fluid flow under extreme conditions. The dies, made from corrosion
resistant 17-4PH stainless steel, were tailor made to fit the test
rig, and were fitted with sub-miniature, titanium-bodied pressure
transducers. |
| |
| Celsum's
Hyperbolic Dies for Wood Composite Studies |
| A
set of polished, tungsten carbide, precision
extrusion dies, custom-made by Celsum Technologies with hyperbolic
profiles is being used for studies into the extrusion flow properties
of wood and resin composites. The studies are being carried out at
a key research institute specialising in the optimisation of the use
of natural resources. This particular set of dies is designed to be
used with a 20 mm bore capillary rheometer, but other sizes can be
made to order. |
|
| |
| Advanced
Concrete Tester Improves QA On Fresh Cement |
|
Celsum
Technologies is offering the CTPT
Two-Point Workability Testing machine. Based on the instrument
developed in the 1970s by Tattersall, Celsum's instrument is fully
automated and is fitted with interlocked safety guards.
|
|
| |
| Precision
Extrusion Dies Supplied To Order |
 |
Celsum
Technologies supplies precision
extrusion dies in tungsten carbide, stainless steel and other
materials for capillary extrusion rheometers, instruments for determining
the flow properties of materials such as molten plastics, food doughs,
pharmaceutical pastes, etc. Parallel bores and profiled bores, such
as hyperbolic dies, can be provided, as can experimental dies for
extrusion. |
|
|
News 
